Brownsugarexporter.com
- Sugarcane is generally harvested in the cooler months of the year, although
it is harvested year-round in Cuba, the Philippines, Colombia, and other prime
areas. As much as two-thirds of the world’s cane crop is harvested by hand,
using long machetes. Since the 1940s, however, mechanical harvesting has
increased. Before or after harvest, the cane is burned in order to drive out
rodents and snakes and to burn off leaves and trash that dull knife blades, but
environmental considerations are leading to the harvesting of whole unburned
cane in several areas.
Harvested
cane is transported to the factory by many means, ranging from manual haulage
to oxcarts, trucks, railway cars, or barges. The usual economic distance
between field and factory is 25 kilometres (15 miles). Minimizing the time
between cutting and processing reduces the amount of cane deterioration and
encourages a higher sugar yield.
Upon
arrival at the factory gate, cane is weighed and sampled for analysis (if
factors other than weight are used for payment). Cane is stored in as small
amounts and for as short a time as possible in the mill yard. Factories run
around the clock, stopping in some areas for only one or two days per month for
cleaning. Although payment is usually based on weight and sucrose content,
quality factors such as moisture, trash, and fibre content also are included.
Payment is generally split, with 60 to 65 percent going to the grower and 35 to
40 percent going to the processor.